Damper motor for Multi-Fuel boilers using wood and older Wood Gun boilers. Honeywell M436A1090
Spring return motors for two-position back draft, outdoor air
changeover, zone, or minimum position damper control.
- Operate outdoor air dampers for combustion or makeup air in
residential and light commercial applications.
- Operate changeover dampers for heating and cooling systems.
- Operate minimum position dampers for ventilation and similar
- Include internal SPDT switch for controlling auxiliary equipment,
additional motors, or to provide a burner interlock switch.
- Spring returns motor to start position on power failure.
Drive shafts located on both sides of motor.
- Adjustable auxiliary switch for cascading motors or operating
- Thermal breaker for overload protection during lifting stroke or
if motor stalls.
- Dimensions: (in.)4 1/2 in. high x 4 5/8 in. wide x 3 3/4 in. deep
- Dimensions: (mm)114 mm high x 118 mm wide x 95 mm deep
- Used With Series 40, 80 circuitsWeight (lb)4 lb 10 oz
- Weight (kg) 2.1 kg
- Mounting: Any position where the output shaft is horizontal
- Frequency: 60 Hz
- Approvals, Underwriters Laboratories Inc: Listed File: E4436,
- Approvals, Canadian Standards Association: Certified: File No.
- Electrical Connections: Screw terminals
- Operating Humidity Range (% RH) 5 to 95% RH
- SupplyVoltage:120 Vac
- Operating Temperature Range: (F) 32 F to 125 F
- Operating Temperature Range (C) 0 C to 52 C
- Approvals, CEReport: S5535
- Timing: Run Time Maximum-- 55 sec
- Internal Auxiliary Switch: 1
- Auxiliary Switch Ratings: AFL - 120 Vac-- 7.2A; ALR- 120 Vac--
43.2A; AFL - 240 Vac-- 3.6A; ALR- 240 Vac-- 21.6A
- Stroke: Angle of Rotation-- 75 degrees maximum
- Control SignalTwo position, SPST
- Fail Safe Mode: Spring Return
- Torque Rating (lb-in.): 20 lb-in.
- Torque Rating (Nm): 2.3 Nm
- Additional Torque Ratings (lb-in.): Breakaway-- 30 lb-in.
- Additional Torque Ratings (Nm): Breakaway-- 3.3 Nm
- External Auxiliary Switches Available: Yes
- Timing, Nominal Opening-- 30 sec, Closing-- 25 sec
- Spring Return Timing: Maximum-- 25 sec
- Nominal Current Draw (amps): Opening-- 0.37 A, Holding-- 0.12 A
- Nominal Power (watts): Opening-- 27 W, Holding-- 8.5 W
- Motor shafts: 2, Hexagonal shape
This product was added to our catalog on Tuesday 01 July, 2014.