Wood Gun E155 CS EPA Approved Wood Boiler
Wood Gun E155 Carbon Steel in Production!
Alternate Heating Systems is pleased to offer a carbon steel version our EPA qualified replacement for the E100 Wood Gun wood fueled boiler. The E155 CS differs from the E155 SS by having a vessel constructed from carbon steel, and by having a lower initial cost. It is intended for operation as a true batch burn boiler, with little to no time spent in the off cycle with fuel remaining in the boiler. This generally means that thermal storage will be required for the CS model.
It features the same basic vessel configuration as our E100, but like the E155 SS, it adds a VFD motor on the induction fan and an Intake Air Diffuser. It also includes additional insulation of the exterior surfaces of the boiler, leaving more available heat for system distribution.
The E155 CS thrives on full rounds and performs better than European style competitors on wood with higher moisture content. It is a great choice for installations where thermal storage is planned or already in place, including dual storage applications for solar thermal storage. If you are not using thermal storage, you will be better served by the E155 SS model. Installation without provision for true batch burn operation will void the warranty.
The family features that characterize the Wood Gun, its robust construction and design, are clearly displayed in the E155.
E155 CS Wood Gun Wood Boiler Specifications
|BTU 6 Hour Average Output*||125,000|
|Water Capacity, Gallons||60|
|Firebox Capacity, Cubic Feet||6.5|
|Firebox Length, Inches||24|
|Standard Door Opening||14" x 14"|
|Width (cyclone removed)||26"|
|Weight (without gas/oil backup), lbs||1,500|
|Typical Heating Capacity, Square Feet**||4,000|
|*Based on loading firebox with seasoned hardwood
**Subject to building design/construction
Specifications subject to change without notice